,

Ubiquiti NSM5 NanoStation M5 MIMO Wireless Bridge/Base Station

Κωδικός προϊόντος: 00787 Κατηγορίες: ,
Ubiquiti
Διαθεσιμότητα:

Άμεση παραλαβή / Παράδoση 1 έως 3 ημέρες


The Ubiquiti NanoStation M5 is a hi-performance, low cost and extremely versatile point-to-point wireless bridge. The NSM5 comes with a newly redesigned, sleek and elegant form-factors along with integrated Ubiquiti AirMax (MIMO TDMA Protocol) Technology.

Ubiquiti NSM5 Key Features:
Frequency 5 GHz
Throughput 150+ Mbps
Range 15+ km

The Ubiquiti NanoStation M5 features 150+ Mbps real outdoor throughput and up to 15km+ range, with 2×2 MIMO technology, meaning the NSM5 links significantly faster and farther than ever before

Next-Gen Antenna Design:
New antenna array designs featuring 16dBi dual-polarity gain at 5GHz. Optimized cross-polarity isolation and in a compact form-factor.

Integrated AirMax Technology:
Unlike standard WiFi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) AirMax protocol allows each client to send & receive data using pre-designated time slots scheduled by an intelligent AP controller.

This “time slot” method eliminates hidden node collisions & maximizes air time efficiency. It provides many magnitudes of performance improvements in latency, throughput, & scalability compared to all other outdoor systems in its class.

– Intelligent QoS – Priority is given to voice/video for seamless access.
– Scalability – High capacity and scalability.
– Long Distance – Capable of high speed 15km+ links.
– Latency – Multiple features dramatically reduce noise.

89.99 Με Φ.Π.Α

Άμεση παραλαβή / Παράδoση 1 έως 3 ημέρες

Dual Ethernet Connectivity:
The New Ubiquiti NanoStation M5 provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.

Intelligent PoE:
Remote hardware reset circuitry of Ubiquiti NanoStation M5 allows for device to be reset remotely from power supply location. In addition, any Ubiquiti NanoStation M5 can easily become 802.3af 48V compliant through use of Ubiquiti’s Instant 802.3af adapter. Remote reset is an additional option. Ubiquiti NanoStation M5 comes standard as 24V without remote reset.

AirOS V:
Version 5 of Ubiquiti’s AirOS builds upon the market leading intuitive user-interface loaded with advanced wireless configurations and routing functionality.

Please visit the Ubiquiti Firmware page for the latest Firmware upgrades
Ubiquiti NanoStation M5 Technical Specifications

System Information:
Processor Specs: Atheros MIPS 24KC, 400MHz
Memory Information: 32MB SDRAM, 8MB Flash
Networking Interface: 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet

RF:
Operating Frequency: 5470 – 5825 MHz
Tx Output Power 11a:
27 dBm @ 1-24 Mbps
25 dBm @ 36 Mbps
23 dBm @ 48 Mbps
22 dBm @ 54 Mbps

Tx Output Power 11n AirMax:
27 dbm @ MCS0
27 dbm @ MCS1
27 dbm @ MCS2
27 dbm @ MCS3
26 dbm @ MCS4
24 dbm @ MCS5
22 dbm @ MCS6
21 dbm @ MCS7
27 dbm @ MCS8
27 dbm @ MCS9
27 dbm @ MCS10
27 dbm @ MCS11
26 dbm @ MCS12
24 dbm @ MCS13
22 dbm @ MCS14
21 dbm @ MCS15

Rx Sensitivity 11a:
-94 dBm @ 1-24 Mbps
-80 dBm @ 36 Mbps
-77 dBm @ 48 Mbps
-75 dBm @ 54 Mbps
Rx Sensitivity 11n AirMax:
-96 dbm @ MCS0
-95 dbm @ MCS1
-92 dbm @ MCS2
-90 dbm @ MCS3
-86 dbm @ MCS4
-83 dbm @ MCS5
-77 dbm @ MCS6
-74 dbm @ MCS7
-95 dbm @ MCS8
-93 dbm @ MCS9
-90 dbm @ MCS10
-87 dbm @ MCS11
-84 dbm @ MCS12
-79 dbm @ MCS13
-78 dbm @ MCS14
-75 dbm @ MCS15

Antenna:
Antenna Gain: 14.6 – 16.1 dBi
Cross-pol Isolation: 22 dB minimum
Polarization: Dual Linear
Max VSWR: 1.6:1
Beamwidth: 45 deg. (H-pol) / 41 deg (V-pol) / 15 deg (Elevation)

Power:
Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
Power Supply (included): 24V, 0.5A POE
Max Power Consumption: 8 Watts

Physical:
Enclosure Characteristics: Outdoor UV Stabilized Plastic
Mounting Kit: Pole straps included
Operating Temperature: -30C to 75C
Operating Humidity: 5 to 95% Condensing
Shock and Vibration: ETSI300-019-1.4
Dimensions: 294 x 31 x 80 mm
Weight: 0.4 kg

Regulatory & Compliance:
Wireless Approvals: FCC Part 15.247, IC RS210, CE
RoHS Compliance: Yes
RF Elements Nanobracket

The RF Elements NanoBracket is a design made of durable UV-stabilized ABS plastic and allows easy and quick installation of the device on a wall, pole (max 52mm) or a console. Installation of the RF Elements NanoBracket is really simple. The holder is mounted in the closest possible position to the center of gravity of the mounted device which makes the construction more stable. The holder color matches perfectly with the color of the NanoStation and StationBox, therefore the construction looks really compact.

Κωδικός προϊόντος: 00787 Κατηγορίες: ,
Βάρος 2.000 kg
brands

MPN

NSMM5

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Ubiquiti NSM5 NanoStation M5 MIMO Wireless Bridge/Base Station”

There are no reviews yet.