Longse
Προβολή όλων των 2 αποτελεσμάτων
-
Κάμερες Ασφαλείας, Συστήματα Ασφαλείας
Longse LIA60EHTC500FS AHD camera 1/2.9″ Sony 5MP CMOS IR 40 m 2,8 – 12 mm
Κάμερες Ασφαλείας, Συστήματα ΑσφαλείαςLongse LIA60EHTC500FS AHD camera 1/2.9″ Sony 5MP CMOS IR 40 m 2,8 – 12 mm
The LIA60EHTC500FS is a Longse AHD camera. It has a CMOS 1 / 2.9 “Sony 5MP sensor, a lens with a variable focal length of 2.8 – 12 mm and a manual zoom. It is equipped with IR LEDs, the maximum range in night mode is 40 meters. The camera can work in 4 modes – AHD, CVI, TVI or CVBS.
The operating mode can be changed using the remote control next to the cable.The offered product has a bullet casing fully adapted for outdoor use (protection class IP66). It can record images in 960P resolution, supports WDR function, DNR noise reduction and mechanical IR-CUT filter. The AHD technology allows you to create professional, high-quality monitoring at a relatively low cost. An additional advantage is the use of coaxial cables, so that in the case of upgrading analog monitoring to AHD, it is not necessary to change the cabling.
The device is powered via the DC plug with 12 V. The maximum power consumption is about 8.4 W (700 mA).
SKU: 01661 -
Κάμερες Ασφαλείας, Συστήματα Ασφαλείας
Longse LIRDNHTC500FS AHD camera 1/2.9″ Sony 5MP CMOS IR 20m 3.6mm
Κάμερες Ασφαλείας, Συστήματα ΑσφαλείαςLongse LIRDNHTC500FS AHD camera 1/2.9″ Sony 5MP CMOS IR 20m 3.6mm
LBH30HTC500FS is a LongHD AHD camera. It has a CMOS 1 / 2.9 “Sony 5MP sensor and a 3.6 mm focal length lens, equipped with IR LED’s, the maximum range in the night mode is 30 meters, the camera can work in 4 modes – AHD, CVI, TVI or CVBS. The operating mode can be changed using the remote control located at the cable.
The product offered has a bullet- type housing that is fully adapted for outdoor use (IP66 degree of protection). It can record images in 960P resolution, it supports the WDR function, DNR noise reduction and mechanical IR-CUT filter. The AHD technology allows to create professional high quality monitoring at a relatively low cost. An additional advantage is the use of coaxial cables, thanks to when the analogue monitoring for AHD is improved, it is not necessary to change the cabling.
The device is powered by a DC plug with 12 V. The maximum power consumption is about 6,6 W (550 mA).
SKU: 01660
